A position pin can move a region without ensuring that its internal shape stays rigid. When a Puppet character bends, a badge, buckle or hard prop may stretch with the surrounding mesh. Use appropriate local deformation resistance, such as Puppet Starch, when the goal is to protect a rigid detail. Check the flexible transition around it as carefully as the detail itself.
Define the rigid region narrowly
Mark the feature that must keep its shape and the neighboring material that should still bend. A metal badge can remain rigid while the cloth beneath it changes orientation. Treating the whole chest as equally stiff can make the character move like a board; protecting only one tiny point can leave the badge stretched around that point.
Adobe describes Starch as a way to resist Puppet distortion. It is different from placing an additional movement pin or controlling overlap. Keep the motion goal unchanged while testing resistance, so an apparent improvement is not merely a smaller bend.
Record the Puppet Engine before copying controls from a tutorial. In Legacy, Starch pins belong to the Stiffness group and have an Extent control. In Advanced, they belong to Deform and have no Extent control; their stiffness relationship depends on the region between Starch and other pins. Inspect the pin arrangement and the relevant Mesh Rotation Refinement behavior instead of searching for a missing Legacy slider. Adobe warns that switching engines after placing or animating pins can change deformation because the engines interpret those pins differently. Keep the existing rig on its chosen engine during this comparison.
Use shape and boundary evidence
Choose a few recognizable badge features: its width-to-height relationship, straight edge or circular outline. Record them in the neutral pose, the strongest bend and the return. Then inspect the cloth immediately outside the protected region. This is a proposed visual test, not a physical-material simulation.
| Region | Intended behavior | Failure to reject |
|---|---|---|
| Badge interior | Keeps approved shape | Lettering or circle stretches |
| Badge perimeter | Moves coherently with costume | Floating or tearing edge |
| Surrounding cloth | Bends naturally for the design | Abrupt rigid plate or sharp kink |
Use the actual artwork's features instead of inventing a universal stiffness number.
Compare resistance at the same bend
Suppose a portrait character bows while wearing a circular medal. Preserve the approved pin motion and compare supported Starch arrangements for the recorded engine on a duplicate. A result that keeps the circle round but locks the entire shoulder can fail the performance. A smaller region may protect the medal while allowing the chest to curve, but it still needs review through the full move.
If the medal must move independently as a hard object, a separate layer or another rig structure may be more suitable than distorting one flat mesh. Explain that structural choice in the handoff. Do not silently redraw the approved symbol or reduce the bow until the deformation becomes unnoticeable; both would change the brief.
Approve resistance without losing performance
Render the largest bend and its return in a short interval. Check the rigid feature, adjacent silhouette and timing. Save the protected-region diagram and the motion used for comparison. Accept only when the hard detail remains recognizable and the required performance survives. The method can help prepare illustrated assets for external animation; it does not prove physically accurate cloth or establish an equivalent native control in Imagild.
Sources and scope
Prepared by Imagild Editorial with AI assistance. The example is a proposed diagnostic, not a reported software test. These are external post-production controls; their documentation does not establish an Imagild feature.